D-Link Xstack DGS-3600 Series User Manual page 251
Gigabit ethernet managed switch
Hide thumbs
Also See for Xstack DGS-3600 Series:
- User manual (433 pages) ,
- Cli manual (431 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
Figure 10- 2 . CPU Interface Filtering Configuration window (Ethernet)
Parameter
Profile ID (1-5)
Type in a unique identifier number for this profile set. This value can be set from 1 to 5.
Type
Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask or IPv6
address. This will change the menu according to the requirements for the type of profile.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Apply to set this entry in the Switch's memory.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
6
Description
•
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
•
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
•
IPv6 instructs the Switch to examine the IPv6 address in each frame's header.
234
Advertisement
Table of Contents
