D-Link Xstack DGS-3600 Series User Manual page 262

Flowlabel
Source IPv6 Address
Destination IPv6
Address
Port
Time Range
To view the settings of a previously correctly configured rule, click
screen:
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Configuring this field, in hex form, will instruct the Switch to examine the flow label field of
the IPv6 header. This flow label field is used by a source to label sequences of packets such
as non-default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by entering the IP
address mask, in hex form.
The user may specify an IP address mask for the destination IPv6 address by and entering
the IP address mask, in hex form.
The CPU Access Rule may be configured on a per-port basis by entering the port number of
the Switch.
Click the check box and enter the name of the Time Range settings that has been previously
configured in the Time Range window. This will set specific times when this CPU access
rule will be implemented on the Switch.
Figure 10- 41. CPU Interface Filtering Rule Display window (IPv6)
in the CPU Access Rule Table to view the following
245