Igmp Snooping Group - D-Link Xstack DGS-3600 Series User Manual
Gigabit ethernet managed switch
Hide thumbs
Also See for Xstack DGS-3600 Series:
- User manual (433 pages) ,
- Cli manual (431 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
IGMP Snooping Group
IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP
packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field. To view
the IGMP Snooping Group Table, click IGMP Snooping Group in the Monitoring menu:
The user may search the IGMP Snooping Table by entering the VLAN Name in the top left hand corner and clicking Search.
The following field can be viewed:
Parameter
VLAN Name
Multicast Group
MAC Address
Reports
Port Member
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 2 . IGMP Snooping Group Table window
9
NOTE: The Switch supports up to 256 IGMP Snooping groups.
Description
The VLAN Name of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
316
Advertisement
Table of Contents
