Stacking Information - D-Link Xstack DGS-3600 Series User Manual

Stacking Information

To change a switch's default stacking configuration (for example, the order in the stack), see Box Information in the
Configuration folder.
The number of switches in the switch stack (up to 12 total) are displayed in the upper right-hand corner of your web-browser. The
icons are in the same order as their respective Unit numbers, with the Unit 1 switch corresponding to the icon in the upper left-
most corner of the icon group.
When the switches are properly interconnected through their optional Stacking Modules, information about the resulting switch
stack is displayed under the Stack Information link.
To view the stacking information, click on the Stacking Information link from the Monitoring folder:
The Stacking Information window holds the following information:
Parameters Description
Box ID
Displays the Switch's order in the stack.
User Set Box ID can be assigned automatically (Auto), or can be assigned statically. The default is Auto.
Type Displays the model name of the corresponding switch in a stack.
Exist
Denotes whether a switch does or does not exist in a stack.
Priority Displays the priority ID of the Switch. The lower the number, the higher the priority. The box
(switch) with the lowest priority number in the stack denotes the Primary Master switch.
MAC Address Displays the MAC address of the corresponding switch in the switch stack.
PROM Version
Shows the PROM in use for the Switch. This may be different from the values shown in the
illustration.
Runtime Version Shows the firmware version in use for the Switch. This may be different from the values shown in
the illustrations.
H/W Version Shows the hardware version in use for the Switch. This may be different from the values shown
in the illustration.
Topology Show the current topology employed using this Switch.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 2. Stacking Information window
289