G Set The Cassette - Sharp SF-2030 Service Manual

G. Set the cassette
Hold up both sides of the cassette from back and insert it along the
guide rails.
Ensure the cassette moves in and out smoothly.
Guide rail
Guide
H. Load paper
Load paper in the cassette, but not above the maximum line.
Insert the cassette all the way into the machine.
Line indication label
6. Set up the lower paper cassette
A. Remove the packing screw of the cassette.
Remove the two packing screw that hold the paper tension plate of
the cassette.
Packing screw
Guide rail
Guide
Packing screw
B. Change the size using the side plates F and R. (set to
A3 position at the factory.)
Set the plates into the appropriate positions and secure wach plate
with two screws.
Screws
Side plate F
C. Change the size of the rear plate.
Remove the rear plate. Set the plate into the position indicated for the
desired paper size.
D. Set the size detect spacer
Change the position of the size detect spacer. Move the size detect
spacers to the appropriate positions.
Size detect spacer
Size detect spacer setting
A3
A4
A4R
B4
B5
B5R
5 – 6
Side plate R Screws
Rear plate
(Ex) A3 setting