Sf-D20/Sf-D21 - Sharp SF-2030 Service Manual

(7) SF-D20/21
SF-D20
SF-D21
Included parts
Mounting screws: 4
Before installation, remove all of the screws, tape,
and shipping material as shown below.
D20
Tape
Tape
Shipping
material
Tape
Shipping
material
Tape
Screw
D21
Tape
Shipping
material
Tape
Be sure to unplug the copier before carrying out
the following procedures.
1. Place the copier on the desk.
Place the copier on the desk so that the feet of the copier fit into the
corresponding holes in the desk.
When doing this, be careful that the copier does not come to rest on
the paper guide or other parts of the desk that might be damaged by
the weight of the copier.
2. Secure the copier to the desk.
Use the included four mounting screws to secure the copier to the
desk.
In addition to securing the copier to the desk, these screws also
function to electrically ground the desk, so be sure to tighten all four
mounting screws securely.
Copier
Left side
Mounting
Desk
screws
5 – 30
Tape
Shipping
material
Tape
Screw
Paper guide
Copier
Right side
Mounting
screws
Desk