Interior Masonry Chimney - Lopi allegiance Owner's Manual

38
ADDENDUM #1 Interior Masonry Chimney Conversions
• Follow the requirements and use the equipment listed in the illustration to the right to install this
appliance into an interior masonry chimney.
• Maximum vertical rise is 30'
• Minimum vertical rise is 10'
• Use the following restrictor positions:
Position 2 for heights between 10' and 14'
Position 3 for heights between 14' and 22'
Position 4 for heights between 22' and 34'
NOTE: these restrictor positions are based upon lab tests. The ideal restrictor position may vary slightly.
Travis Industries
Addenda
The entire chimney system
must be air-tight. Make sure to
seal the flashing, clean-out,
and thimble connection, and to
inspect the chimney.
Make sure the coaxial pipe
maintains a 1" clearance to any
combustible. The vent must be
sealed air-tight.
#990 90° Elbow
Co-Axial
Straight
Lengths
#991 High
Wind
Termination
Flashing
(included in
#934 Masonry
Conversion Kit
#711 Flex Liner
(4" dia.)
(or other UL 1777
Gas Liner)
Connector with
Cover (included
in #934
Masonry
Conversion Kit
4041220
9 3 5 0 8 1 2 3