Making And Answering Calls Using The Failover Mode - Mitel 5360 User Manual

To answer a waiting analog call or return to the original analog call:
1. Do one of the following:
Press and release the hookswitch
x
Press Cancel (
x
2. Press the key you have programmed as Analog Line.
To put a current call on hold to answer an incoming analog call:
Press the highlighted Analog Line key.
x
To switch between the current call and the held call when one of the calls is using the
analog line, do one of the following:
If your current call is using the analog line, press the flashing Line key of the held call.
x
The analog call is automatically put on hold.
If your current call is using an IP line, press the highlighted Analog Line key. The IP line is
x
automatically put on hold.
To end a current call when an incoming analog call arrives:
Press Cancel (
x
and you are connected to the caller on the analog line.
To end the current analog call when an incoming call arrives:
Press Cancel (
x
caller.

Making and Answering Calls Using the Failover Mode

To make a call using the analog line during an IP connection failure:
1. Lift the handset.
The phone displays IP FAIL: ANALOG CALL.
2. Dial the number.
To answer a call using the analog line during an IP connection failure:
Lift the handset. The call is answered. The phone displays IP FAIL: ANALOG CALL.
x
)
) and then press the highlighted Analog Line key. The current call ends
). The current analog call ends and you are connected to the new
- 77 -
5360 IP Phone – User Guide