Speak@Ease; Speed Call; Contact Presence - Mitel 5360 User Manual

Speak@Ease

Users of the Speak@Ease softkey can place a call by speaking the name of the person they
wish to dial. Speak@Ease enables you to have access to Mitel Speech Server. The Speech
Server is a speech recognition application that routes incoming calls to a specific destination
based on spoken commands.
To dial a call using Speak@Ease:
1. Press the key you have programmed to Speak@Ease.
2. Speak the name of the person you wish to call.

Speed Call

Speed Call is an application that allows you to dial a specific number with one key press. You
must program Speed Call on a Programmable key. For more information on programming
this key, see Program Feature Keys Using the Settings
To make a Speed Call:
Press the key that you have programmed as your Speed Call key.
x

Contact Presence

Unified Communicator (UC) Express supports the display of contact presence information
through icons located on Programmable Keys that have been programmed as speed dials.
The icons will be displayed on the button. The presence icons for the 5360 are shown below:
An alternate speed dial number is supported for each contact, and the button label will show
the alternate number instead of the primary number for some presence states.
Online
Away,
Be Right Back,
Out to Lunch
Busy,
On the Phone
Offline
Contact Presence Icons
- 72 -
Application.