Display Setting; Dimmer Control; Scroll Type Setting; Scroll Setting (Text Scroll) - Alpine iDA-X303 Owner's Manual

01GB00iDAX303.book Page 22 Wednesday, October 29, 2008 11:19 AM

Display Setting

DISPLAY is selected on the setup main menu in step 2.

Dimmer Control

MANUAL / AUTO (Initial setting)
Set the Dimmer control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.

Scroll Type Setting

TYPE1 / TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
TYPE1: The characters scroll from right to left, a single
character at a time.
TYPE2: Words are built up from left to right, a single character
at a time. When the display is filled, it is cleared and
the remaining words are displayed the same way until
all words of the title have been shown.

Scroll Setting (TEXT SCROLL)

AUTO / MANUAL (Initial setting)
You can set a scroll type such as song title or file name on the source
screen. If the search mode screen displays fills with text, the display
scrolls.
TEXT SCROLL AUTO :
TEXT SCROLL MANUAL : The first display scrolls text
• In parts of the display, scrolling may not occur, or scroll content may
differ.
• Regardless of this setting, if the display is filled with text, the display
scrolls.

iPod Setting

IPOD is selected on the setup main menu in step 2.

iPod Search Mode Setting

ON / OFF
The unit allows you to search for the iPhone/iPod using eight different
search modes.
When the search mode is in PLAYLISTS/ARTISTS/ALBUMS/
PODCASTS/AUDIOBOOKS, the initial setting is ON, and when the
search mode is in GENRES/COMPOSERS/SONGS, the initial setting
is OFF.
• For search mode details, refer to "Searching for a desired Song/
Title" (page 9).
22
-EN
01GB05iDAX303.fm
Text information are scrolled
automatically.
information one time only.
IMPRINT Operation
(Optional)
Alpine introduces IMPRINT - the world's first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended, refer to "About IMPRINT" (page 29).
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Double Action encoder
IMPRINT
/ENTER

Changing MultEQ mode

MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press and hold IMPRINT for at least 2 seconds.
2
Press /ENTER.
3
Turn the Double Action encoder to select the
MultEQ mode, and then press
OFF (Manual Mode) CURVE 1 (MultEQ-1)
CURVE 2 (MultEQ-2) OFF (Manual Mode)
4
Press and hold IMPRINT for at least 2 seconds to
return to normal mode.
• The Curve mode can be selected only when curve 1 and curve 2 are
stored.
• When using MultEQ, MX, X-OVER, Time Correction, Factory's EQ,
SUBW PHASE, SUBW CHANNEL, TW Setup, EQ Mode, Filter Type,
Parametric EQ and Graphic EQ are set automatically. They are no
longer user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
ALPINE iDA-X303 68-14470Z02-A (EN)
FUNCTION/SETUP
PRESET
/ENTER.