Bluetooth Setting; Setting The Bluetooth Connection; Audio Setting (Only When External Audio Processor Is Connected); Operating The External Audio Processor (User Preset) - Alpine iDA-X303 Owner's Manual

01GB00iDAX303.book Page 20 Wednesday, October 29, 2008 11:19 AM
DISPLAY:
DIMMER SCROLL TYPE
IPOD:
PLAYLISTS ARTISTS
AUDIOBOOKS GENRES
PLAYLISTS
3
* If IMPRINT audio processor is connected, you can make more
detailed settings for the audio setting. For details, refer to
"IMPRINT Operation (Optional)" (page 22).
4
* Displayed only when an external audio processor is connected.
5
* Displayed only when MX is set to ON and an external audio
processor is connected.
6
* Refer to "Setting the Calendar" (page 7).
7
* Refer to "Setting the Time" (page 7) .
8
* Displayed only when BT IN is OFF.
9
* The setting can be made only when AUX+/AUX is set to ON.
10
* Displayed only when DIGITAL AUX is set to ON.
11
* Displayed only when AUX+ is set to ON.
4
Turn the Double Action encoder to change the
setting, and then press
(e.g. Select POWER IC ON or POWER IC OFF.)
5
Press and hold for 2 seconds to return to normal
mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

Bluetooth Setting

Select BT from the setup main menu in step 2 above.
If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you
can place a hands-free call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth INTERFACE (KCE-400BT) is
connected and the Bluetooth function is used. For details, refer to the
Owner's Manual of the optional Bluetooth INTERFACE (KCE-400BT).
Set ADPT when the Bluetooth INTERFACE (KCE-400BT) is
connected.
• The button can be used only when the optional Bluetooth
INTERFACE (KCE-400BT) is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
• When INT MUTE is set to ON, the Bluetooth setting cannot be made.
When the Bluetooth INTERFACE (KCE-400BT) is connected, set INT
MUTE to OFF. Refer to "Turning Mute Mode On/Off (INT MUTE)"
(page 21).

Setting the Bluetooth Connection

BT IN ADPT / BT IN OFF (Initial setting)
Audio Setting (Only when external audio
processor is connected)
AUDIO is selected on the setup menu in step 2.

Operating the External Audio Processor (USER PRESET)

PRE-1 (Initial setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6
Turn the Double Action encoder to select the desired preset number,
and then press /ENTER.
In normal mode, you can also call up the preset memory of the external
audio processor by pressing and holding "PRESET" for at least 2
seconds. Refer to "Operating the External Audio Processor" on page 19.
• For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
20
-EN
01GB05iDAX303.fm
TEXT SCROLL DIMMER
ALBUMS PODCASTS
COMPOSERS SONGS
/ENTER.

Turning Media Xpander ON/OFF

OFF (Initial setting) / ON
When the Media Xpander is on, and external audio processor is
connected, you can adjust the Media Xpander level.

Setting the MX Level

NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPhone/iPod, will be able to reproduce the music clearly even in cars
with a lot of road noise. The initial setting is different depending on the
source.

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF
The adjustment can also be made by pressing and holding IMPRINT
for at least 2 seconds. Refer to "Turning Subwoofer ON/OFF"
(page 17).
* For this unit, when connecting IMPRINT audio processor, you can't
turn the subwoofer ON or OFF by pressing IMPRINT.

General Setting

GENERAL is selected on the setup main menu in step 2.
Setting of Calendar Display Pattern Switching
(CALENDAR)
M/D/Y (Initial setting) / Y/M/D / D/M/Y
You can switch the calendar display pattern to be shown when the time
is displayed.
Y : shows the year
M : shows the month
D : shows the day
ex. M/D/Y 01/01/2009

Setting the Clock Display (CLK MODE)

24H / 12H (Initial setting)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.

Connecting an MP3 Changer (PLAY MODE)

CD-DA (Initial setting) / CD-DA&MP3
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
CD-DA : Only CD data can be played back.
CD-DA&MP3 : Both CD data and MP3 file tracks can be played
back.
• Change discs after performing this setting.
ALPINE iDA-X303 68-14470Z02-A (EN)
*