Usb Memory/Portable Audio Player/Changer (Optional); Bank Function (Usb Memory); Playback; Selecting A Disc (Changer) (Optional) - Alpine iDA-X303 Owner's Manual

01GB00iDAX303.book Page 12 Wednesday, October 29, 2008 11:19 AM
USB memory/Portable audio
player/Changer (Optional)
SOURCE
Double Action encoder
BAND
/
If a USB memory device/Portable audio player or changer is connected
to the unit, MP3/WMA/AAC files can be played back.
• In the USB mode, when this unit is reset, ACC is switched from OFF
to ON, or when the USB is connected to this unit, "BANKING" is
displayed for several seconds.
Using the USB Memory Banking Function
1. What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
"Banking" refers to the grouping of songs available in USB memory, in
banks of 1,000 songs each.
2. About Banking
While a bank is being built up, "BANKING" is displayed. Banking
occurs whenever a USB memory device is connected or after power to
the head unit turns on.
It can take anywhere from a few seconds to up to 10 minutes for
banking to complete. This depends on the number of files and folders in
USB memory.
3. Available operations while Banking
• Search functions, such as album search or tag information (artist
display, etc.) are available. However, during Banking, the
information display changes so the VIEW operation is not available.
• With a song playing, Regular fast-forwarding and next song selection
is available.
• While Banking, the song playback order may differ from the song
order in the USB memory device.

BANK Function (USB memory)

This unit has a BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum of 10 banks (10,000 songs) can be recognized. BANK1
(songs 1 to 1,000) is set as the default. If you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK No.
BANK1
BANK2
BANK10
1
Press PRESET.
The BANK selection mode is displayed.
2
Turn the Double Action encoder.
Select the desired BANK.
You can scroll the page by pressing and turning the Double
Action encoder.
12
-EN
01GB05iDAX303.fm
FUNCTION/SETUP
PRESET VIEW
/ENTER
Song number
1~1,000
1,001~2,000
9,001~10,000
3
Press /ENTER.
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different BANK.

Playback

1
Press SOURCE to select the USB AUDIO or
CHANGER mode.
2
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
• When a Portable audio player is connected, fast-forwarding/fast-
reversing is not available.
3
To pause playback, press
Pressing / again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• "NO SUPPORT" is displayed when text information is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.

Selecting a Disc (Changer) (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 13 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press PRESET.
The DISC CHANGE screen is displayed.
2
Turn the Double Action encoder to select a disc.
You can scroll the page by pressing and turning the Double
Action encoder.
3
Press /ENTER.
The selected disc number appears in the display and
CD/MP3/WMA/AAC playback starts.
ALPINE iDA-X303 68-14470Z02-A (EN)
/ .