Sound (Beep) Guide Function; Turning Mute Mode On/Off (Int Mute); Setting The Aux+ Mode; Setting The Aux+ Name Mode - Alpine iDA-X303 Owner's Manual

01GB00iDAX303.book Page 21 Wednesday, October 29, 2008 11:19 AM

Sound (Beep) Guide Function

BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT MUTE)

INT MUTE ON / INT MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to ADPT, INT MUTE cannot be set. Refer to
"Setting the Bluetooth Connection" (page 20).
• When the Bluetooth INTERFACE (KCE-400BT) is connected, set INT
MUTE to OFF.

Setting the AUX+ Mode

AUX+ ON / AUX+ OFF (Initial setting)
You can input the audio of an external device, (such as a Portable audio
player) to the Bluetooth interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the Bluetooth
interface connector as an AUX IN.
An external device and a Bluetooth INTERFACE (KCE-400BT) cannot
be connected at the same time.
AUX+ ON : Set to ON when an external device is connected. If
SOURCE is pressed and AUX+ is selected, the
sound of the external device is input to the unit.
AUX+ OFF : When set to OFF, AUX+ source cannot be selected.

Setting the AUX+ NAME Mode

AUX (Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX+ NAME when AUX+ is ON.

Setting the AUX Mode (V-Link)

AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
/ENTER when AUX is set to ON, and select AUX NAME by
turning the Double Action encoder, then press
After that, turn the Double Action encoder to select the desired AUX
name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
then press BAND to select your desired device.

Setting the External Digital Input (DIGITAL AUX)

DIGITAL AUX ON / DIGITAL AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5.1-channel
surround sound.
You can change the D-AUX Name when DIGITAL AUX is set to ON.
Press /ENTER when DIGITAL AUX is set to ON, and select
D-AUX NAME by turning Double Action encoder, then press
/ENTER.
• Press SOURCE , and select the D-AUX mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.
01GB05iDAX303.fm
/ENTER.
SOURCE to select AUX mode and

Setting the AUX+ Level (AUX IN GAIN)

LOW (Initial setting) / HI
After setting to ON in "Setting the AUX+ Mode", this setting can be
carried out.
LOW: Decreases the external input audio level.
HI: Increases the external input audio level.

Connecting to an External Amplifier (POWER IC)

ON (Initial setting) / OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POWER IC OFF : Use this mode when the front pre-amplifier of the
unit is used to drive an external amplifier
connected to the speakers. In this setting, the
head unit's internal amplifier has no output to
drive speakers.
POWER IC ON : The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the POWER IC is set to
OFF.

Demonstration

DEMO ON / DEMO OFF (Initial setting)
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
ALPINE iDA-X303 68-14470Z02-A (EN)
Speakers
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
21
-EN