Table of Contents
Advertisement
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
Rotary encoder
/ENT
SOURCE/
/ESC
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press
(e.g. Select POWER IC)
1
BLUETOOTH IN*
FM-LEVEL
3
PI SEEK*
ALERT PTY31*
LCD CONTRAST
DIMMER
SCROLL TYPE
TEXT SCROLL
AUX+ SETUP
AUX+ NAME*
POWER IC
LANGUAGE
1
*
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
*
Refer to "Receiving RDS Regional (Local) Stations" (page 9).
3
*
Refer to "PI SEEK Setting" (page 10).
4
*
Refer to "Setting PTY31 (Emergency Broadcast) reception"
(page 10).
5
*
Displayed only when BLUETOOTH IN is OFF.
6
*
Displayed only when AUX+ SETUP is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select POWER IC ON or POWER IC OFF.)
4
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Press
/ESC to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
18
-EN
F/SETUP
/ENT.
2
RDS REGIONAL*
4
ILLUMINATION
PLAY MODE
5
INT MUTE*
6
6
AUX IN GAIN*
DEMO
BLUETOOTH IN
BLUETOOTH IN
Setting the BLUETOOTH Connection
BT IN ADAPTE / BT IN OFF (Initial setting)
If an optional BLUETOOTH INTERFACE is connected, you can place
a hands-free call by a BLUETOOTH-equipped mobile phone.
Make this setting when the BLUETOOTH INTERFACE is connected
and the BLUETOOTH function is used. For details, refer to the Owner's
Manual of the optional BLUETOOTH INTERFACE.
Set ADAPTE when the BLUETOOTH INTERFACE is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
Sound Customizing
Adjusting Source Signal Levels
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Visual Customizing
Changing Lighting Colour
ILLUMI TYPE1 (initial setting) / ILLUMI TYPE2
TYPE1
TYPE2
You can change the lighting colour of the following six buttons.
SOURCE/ , BAND/TA,
,
TYPE1: When the colour of the six buttons is blue, the colour of
the other is red.
TYPE2: When the colour of the six buttons is red, the colour of
the other is red.
Adjusting Display Contrast
CONTRAST
You can adjust the display contrast for better visibility.
You can adjust in a range of –5 and +3.
• The initial setting at the factory is "0".
,
,
.
Advertisement
Table of Contents
