Alpine iDA-X301RR Owner's Manual

Digital media receiver

Hide thumbs Also See for iDA-X301RR:

Quick reference manual (27 pages)

Quick reference manual (27 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Alpine iDA-X301RR

Page 1 Si prega di leggere prima di utilizzare il Παρακαλ ύμε δια άστε τ πριν attrezzatura. ρησιμ π ιήσετε τη συσκευή. ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ITALIA S.p.A. 1-1-8 Nishi Gotanda, 161-165 Princes Highway, Hallam Viale C. Colombo 8, 20090 Trezzano...
Page 2 iDA-X301/iDA-X301RR...
Page 3: Table Of Contents
File/Folder Name Search (MP3 Changer) ..17 Switching between Quick Search mode and Folder up/down mode (MP3 changer) Setting RDS Reception Mode and Receiving (iDA-X301/iDA-X301RR only) ....17 RDS Stations ..........8 Quick Search (changer) ........17 Receiving RDS Regional (Local) Stations ..8 Select the desired Folder (Folder up/down) PI SEEK Setting ..........
Page 4 Sound Setting IMPRINT Operation (Optional) (iDA-X303 only) Adjusting Subwoofer/Bass/Treble/Balance (Between Left and Right)/Fader (Between Changing MultEQ mode .........26 Front and Rear)/Loudness/Defeat ....20 Adjusting Sound Setting in Manual Mode ..26 Turning Subwoofer ON/OFF ......20 USER PRESET ..........27 Storing the Audio Adjustment Level ....27 Setting the Subwoofer System ......
Page 5: Operating Instructions
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. or death. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Page 6 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license. Other trademarks and trade names are those of their respective owners.
Page 7: Double Action Encoder Operation (Ida-X303 Only)
Alternate operation Double Action Press and turn the Double Action encoder to the left or right. When you release the Double Action encoder, the display Encoder Operation changes. (iDA-X303 only) Double Action encoder Double Action encoder Push There are 2 ways to operate the Double Action encoder. Normal operation Turn the Double Action encoder to the left or right.
Page 8: Getting Started
Grasp the left side of the front panel and pull it out. Connectable to Steering Remote Control Interface Box You can operate this unit from the vehicle’s control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.
Page 9: Radio
Turn the Double Action encoder (iDA-X303 only) Radio or Rotary encoder (iDA-X301/iDA-X301RR only) to select the preset number. iDA-X303 Press and hold /ENTER for at least 2 seconds. The selected station is stored. SOURCE The display shows the band, preset number and station Double Action encoder frequency memorized.
Page 10: Rds
Double Action encoder FUNCTION/SETUP Press and hold FUNCTION/SETUP for at least 2 seconds to activate the SETUP selection mode. Turn the Double Action encoder (iDA-X303 only) or Rotary encoder (iDA-X301/iDA-X301RR only) to select the TUNER mode, and then press /ENTER. AUDIO GENERAL...
Page 11: Setting Pty31 (Emergency Broadcast) Reception
Press and hold FUNCTION/SETUP for at least 2 Turn the Double Action encoder (iDA-X303 only) seconds to activate the SETUP selection mode. or Rotary encoder (iDA-X301/iDA-X301RR only) to select PTY, and press /ENTER, while the unit is in Turn the Double Action encoder (iDA-X303 only) Radio (FM receiving) mode.
Page 12: Priority News
The display will change every time the button is pressed. iPod (supplied, iDA-X303 only). iDA-X301/ If there is PS (Programme Service Name) iDA-X301RR : The iPod only can be connected to Full Speed Band Band connector by using the proprietary ALPINE...
Page 13: Playback
• You can select your preferred search mode. Refer to “iPod Search Press SOURCE to switch to the IPOD (iDA-X301/ Mode Setting” (page 25). iDA-X301RR only) or USB IPOD (iDA-X303 only) mode. For example: Searching by Artist name The following example explains how an ARTISTS search is Press to select the desired song.
Page 14: Percent Skip Function
By using this function on iDA-X301/ selected in the desired playlist search mode and /ENTER is iDA-X301RR pressed, you can search for all songs in the iPhone (iDA-X303 only)/ iPod. Also, if you press and hold /ENTER for at least 2 seconds, all songs in the iPhone (iDA-X303 only)/iPod are played back.
Page 15: Search Position Memory
Press /ENTER. The Repeat mode is activated. Random Play Shuffle (M.I.X.) Turn the Double Action encoder (iDA-X303 only) or Rotary encoder (iDA-X301/iDA-X301RR only) to Press FUNCTION/SETUP. select REPEAT SONG, and press /ENTER. Turn the Double Action encoder (iDA-X303 only) REPEAT SONG...
Page 16: Usb Memory/Portable Audio Player (Ida-X303 Only)/Changer (Optional)
BANK10 9,001~10,000 Press PRESET. The BANK selection mode is displayed. Turn the Double Action encoder (iDA-X303 only) or Rotary encoder (iDA-X301/iDA-X301RR only). Select the desired BANK. BAND/TA /ENTER VIEW You can scroll the page by pressing and turning the Double...
Page 17: Selecting A Disc (Changer) (Optional)
Using the KCA-410C (Versatile Link Terminal) multiple changers can Turn the Double Action encoder (iDA-X303 only) be controlled by this unit. or Rotary encoder (iDA-X301/iDA-X301RR only) to See “Multi-Changer Selection (Optional)” on page 15 for selecting the select the Repeat playback mode.
Page 18: Random Play)
Press FUNCTION/SETUP. You can search for a song by track number. Turn the Double Action encoder (iDA-X303 only) or Rotary encoder (iDA-X301/iDA-X301RR only) to Press /ENTER during play. select M I X. This will set the search mode.
Page 19: File/Folder Name Search (Mp3 Changer)
Turn the Double Action encoder (iDA-X303 only) File Name Search mode or Rotary encoder (iDA-X301/iDA-X301RR only) to Select the desired file by turning the Double Action select an album, and then press /ENTER. encoder (iDA-X303 only) or Rotary encoder Turn the Double Action encoder (iDA-X303 only) (iDA-X301/iDA-X301RR only).
Page 20: Select The Desired Folder (Folder Up/Down) (Mp3/Wma/Aac)
• Some characters may not be correctly displayed. ON. For details, refer to “Switching between Quick Search mode and • “NO SUPPORT” is displayed when text information is not Folder up/down mode (MP3 changer) (iDA-X301/iDA-X301RR compatible with this unit. only)” (page 17).
Page 21 Method for creating MP3/WMA/AAC files Terminology Audio data is compressed by using MP3/WMA/AAC specified software. For details on creating MP3/WMA/AAC files, refer to Bit rate the user’s manual for that software. This is the “sound” compression rate specified for encoding. The MP3/WMA/AAC file extensions that can be played back on the higher the bit rate, the higher the sound quality, but also the larger unit are as follows:...
Page 22: Sound Setting
SUBW SUBW SYSTEM* BASS TREBLE • If IMPRINT (iDA-X303 only) or SOUND (iDA-X301/iDA-X301RR SUBW only) is not pressed within 5 seconds after selecting the Subwoofer, * Displayed only when subwoofer is ON. Bass, Treble, Balance or Fader mode, the unit automatically returns to normal mode.
Page 23: Setting The Bass Control
A narrower setting will The adjustment can also be made by pressing IMPRINT (iDA-X303 boost only frequencies near the centre frequency. only) or SOUND (iDA-X301/iDA-X301RR only). Refer to “Adjusting Subwoofer/Bass/Treble/Balance (Between Left and Right)/Fader Setting the Bass Centre Frequency (Between Front and Rear)/Loudness/Defeat”...
Page 24: Adjusting The High Pass Filter
Press and hold IMPRINT (iDA-X303 only) or SOURCE Double Action encoder FUNCTION/SETUP SOUND (iDA-X301/iDA-X301RR only) for at least 2 seconds to activate the AUDIO selection mode. Turn the Double Action encoder (iDA-X303 only) or Rotary encoder (iDA-X301/iDA-X301RR only) to select the HPF Adjustment mode, and then press /ENTER.
Page 25: Bluetooth Setting
PRE-1 (Initial Setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6 processor is connected. (or the IMPRINT audio processor is Turn the Double Action encoder (iDA-X303 only) or Rotary encoder connected (iDA-X303 only)). (iDA-X301/iDA-X301RR only) to select the desired preset number, and iDA-X303 only. then press /ENTER.
Page 26: General Setting
SOURCE is pressed and AUX+ is selected, the sound of the external device is input to the unit. AUX+ OFF : Set to OFF when an iPod (iDA-X301/iDA-X301RR only) is connected. When set to OFF, AUX+ source cannot be selected.
Page 27: Connecting To An External Amplifier (Power Ic)
Rear all words of the title have been shown. right Scroll Setting (TEXT SCROLL) iDA-X301/iDA-X301RR : Speakers AUTO / MANUAL (Initial setting) You can set a scroll type such as song title or file name on the source Rear left screen.
Page 28: Imprint Operation (Optional) (Ida-X303 Only)
Use steps 1 to 5 to select one of the Sound menu modes to modify. See the applicable section below for Alpine introduces IMPRINT - the world’s first technology that details about the selected item. thoroughly eliminates in-car acoustic problems that normally degrade...
Page 29: User Preset
USER PRESET Sound Field Adjustment The setting of Parametric EQ/Graphic EQ Adjustment, Time Correction • If IMPRINT audio processor is connected, you can make more and X-Over can be adjusted in this mode. detailed settings for the audio setting. For details, refer to “IMPRINT Operation (Optional) (iDA-X303 only)”...
Page 30: Adjusting The Graphic Equalizer Curve
Adjusting the Graphic Equalizer Curve Repeat steps 1 to 3 to set another speaker. By setting these values to make its sound reach the You can modify the equalizer settings to create a response curve more listening position at the same time as the sound of other appealing to your personal taste.
Page 31: Turning Subwoofer On/Off
Slope Adjustment Slope Adjustment -3 Turn the Double Action encoder to adjust the -3 Turn the Double Action encoder to adjust the slope. slope. Adjustable slope: FLAT, 6 dB/oct., 12 dB/oct., 18 dB/oct., Adjustable slope: FLAT , 6 dB/oct., 12 dB/oct., 18 dB/oct., 24 dB/oct.
Page 32: Setting The Subwoofer Channel (Subw Channel)
Setting the Subwoofer Channel Setting the MX Level (SUBW CHANNEL) MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, USB memory and You can set the subwoofer output to stereo or monaural. Make sure to iPod, will be able to reproduce the music clearly even in cars with a lot set the correct output for your subwoofer type.
Page 33: About Time Correction
These values are the time correction values for the different About Time Correction speakers. Setting these values to make each sound reach the listening position at the same time as the sound of other speakers. Time Correction Value List The distance between the listener and the speakers in a car vary widely due to the complex speaker placement.
Page 34: About The Crossover
---- 12, 18, ---- 200 Hz –12 dB For the recommended crossover frequencies of Alpine speakers, refer speaker 24 dB/oct. to the respective Owner’s Manual. FLAT, 6, Front high 20 Hz -...
Page 35: About Imprint
These acoustical problems are so severe that no correction system has been able to overcome them. Until now, with the introduction of IMPRINT, Alpine provides a hardware/software combination that not only solves these problems, it actually improves the sound stage, tonal...
Page 36: Information
(page 6). To reset the iPod, refer to the Owner’s Manual of the iPod. unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. Indication for iPod Mode (USB connection), (iDA-X303 only) Basic No function or display.
Page 37: Indication For Usb Memory
• A copy-protected WMA file was played back. Indication for iPod Mode - You can only play back non-copy-protected files. (Direct Connection), (iDA-X301/ iDA-X301RR only) NO SUPPORT • Text information that is not recognizable by the unit has been input.
Page 38: Indication For Cd Changer
- The indication will disappear when the temperature returns to normal operating range. • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button and pull out the magazine. Check the indication. Insert the magazine again.
Page 39: Specifications
NOSEPIECE SIZE Specifications Width iDA-X303 170 mm (6-3/4") FM TUNER SECTION iDA-X301/iDA-X301RR 170 mm (6-3/4") Tuning Range 87.5-108.0 MHz Height Mono Usable Sensitivity 0.7 µV iDA-X303 46 mm (1-13/16") Alternate Channel Selectivity 80 dB iDA-X301/iDA-X301RR 46 mm (1-13/16") Signal-to-Noise Ratio...
Page 40: Installation And Connections
Failure to do so may result in damage to the unit and/ and results in serious accident. or the vehicle. When in doubt, consult your Alpine dealer. • The iDA-X303/iDA-X301/iDA-X301RR uses female RCA-type DO NOT ALLOW CABLES TO BECOME ENTANGLED IN jacks for connection to other units (e.g.
Page 41: Installation
* The illustrator is for iDA-X303. iDA-X301/iDA-X301RR and put the Rubber Cap on the hex bolt. If your vehicle does not have the Mounting Support, reinforce the head unit with the metal mounting strap (not supplied).
Page 42 USB connector FULL SPEED™ Connection Cable (KCE-433iV) (supplied, iDA-X301/iDA-X301RR only) Cable (supplied) • When removing USB memory, pull it out straight. • If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again.
Page 43: Connections
(Grey/Black) Front right (Grey) (Violet/Black) Rear right (Violet) To USB memory/portable audio player or iPhone /iPod To iPod (iDA-X301/iDA-X301RR only) To Bluetooth INTERFACE (KCE-400BT) (sold separately) CD Changer (Sold Separately) Speakers Rear left iDA-X303 only Amplifier (Sold Separately) Rear right...
Page 44 • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

This manual is also suitable for:

Ida-x301 Ida-x303

Alpine iDA-X301RR Owner's Manual

Contents

Operating Instructions

Warning

Caution

Precautions

Double Action Encoder Operation (Ida-X303 Only)

Getting Started

Radio

Rds

Iphone (Ida-X303 Only)/Ipod (Optional)

USB Memory/Portable Audio Player (Ida-X303 Only)/Changer (Optional)

Sound Setting

Setup

IMPRINT Operation (Optional) (Ida-X303 Only)

Information

Installation and Connections

Warning

Caution

Precautions

Quick Links

Related Manuals for Alpine iDA-X301RR

Summary of Contents for Alpine iDA-X301RR

This manual is also suitable for:

Table of Contents