01GB00iDAX303.book Page 7 Wednesday, October 29, 2008 11:19 AM
Setting the Calendar
1
Press and hold FUNCTION/SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Double Action encoder to select the
GENERAL mode, and then press
1
2
BT
AUDIO
GENERAL
*
*
BT
1
*
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
*
Displayed only when an external audio processor is connected. For
details, refer to the Owner's Manual of the external audio processor.
3
Turn the Double Action encoder to select
CALENDAR ADJ, and then press
4
Turn the Double Action encoder to set year.
5
Press
/ENTER.
6
Repeat steps 4 and 5 above to set month, day.
7
Press and hold
for at least 2 seconds to return to
normal mode.
• Pressing
during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Time
1
Press and hold FUNCTION/SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Double Action encoder to select the
GENERAL mode, and then press
1
2
BT
AUDIO
GENERAL
*
*
BT
1
*
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
*
Displayed only when an external audio processor is connected. For
details, refer to the Owner's Manual of the external audio processor.
3
Turn the Double Action encoder to select CLK
ADJ, and then press
4
Turn the Double Action encoder to set hour.
5
Press
/ENTER.
6
Repeat steps 4 and 5 above to set minutes.
7
Press and hold
for at least 2 seconds to return to
normal mode.
• Pressing
during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
01GB05iDAX303.fm
/ENTER.
DISPLAY
IPOD
/ENTER.
/ENTER.
DISPLAY
IPOD
/ENTER.
Displaying the Calendar/Time
Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
0 9 / 0 1 / 0 1
12:00
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
ALPINE iDA-X303 68-14470Z02-A (EN)
7
-EN