Scan; Array - ATEN KN1108V User Manual

KVM Over the NET™ User Manual

Scan

Scan is found at the bottom of the Local Console and AP GUI Sidebar. It
automatically switches among all the ports that are visible in the Sidebar (see
Filter, below), at regular intervals, so that their activity can be monitored
automatically. See Auto Scanning, page 205 for details.
Note: 1. You can also invoke this function from the port's Toolbar. See The
Port Toolbar, page 203 for details.
2. Running Scan mode can affects other users access. See Multiuser
Operation, page 210 for more information.

Array

Array is found at the bottom of the Browser, Local Console, and AP GUI
Sidebar. It represents another way of monitoring port activity. Under this
function your screen is divided into a grid of panels, with each panel showing
the video display of a particular port. Only ports that are visible in the Sidebar
(see Filter, below), and that are on line are displayed – all other ports are blank.
See Panel Array Mode, page 208 for details
Note: 1. You can also invoke this function from the port's Toolbar. See The
Port Toolbar, page 203 for details.
2. The Local Console needs to use the remote bus for Array mode, so it
will affect remote users access. See Multiuser Operation, page 210
and Users and Buses, page 211 for more information.
90