The Port Toolbar - ATEN KN1108V User Manual

The Port Toolbar

The KN1108v / KN1116v interface provides a toolbar to help you with port
switching operations from within the captured port. To bring up the toolbar, tap
the GUI Hotkey (Scroll Lock or Ctrl), twice. The toolbar appears at the upper
left corner of the screen:
Depending on the settings that were selected for ID Display (see page 111), the
Port Number and/or the Port Name display at the right of the toolbar. The
meanings of the toolbar icons are given in a table on page 204.
When the toolbar displays, mouse input is confined to the toolbar area and
keyboard input has no effect on the server connected to the port. To carry out
operations on the server, close the toolbar by clicking its X icon.
To return to the Port Access Connections page, either click the appropriate icon
(see The Toolbar Icons, page 204), or tap the GUI hotkey again.
Note: 1. You can adjust the toolbar transparency (see Video Settings, page 66).
2. The toolbar functions and icons are also incorporated in the Control
Panel. If you choose to enable them in the Control Panel (see Control
Panel Configuration, page 82), you can disable the Toolbar (see User
Preferences, page 111 for details). To recall the Port Access
Connections page when there is no Toolbar, simply tap the GUI
hotkey twice.
Chapter 12. Port Operation
203