ATEN KN1108V User Manual page 74

KVM Over the NET™ User Manual
An explanation of the Hotkey actions is given in the table below:
Action
Exit remote location Breaks the connection to the KN1108v / KN1116v and returns you
Adjust Video
Toggle Control
Panel
Toggle mouse
display
Adjust mouse
Video Auto-sync
Show/Hide Local
Cursor
Substitute Ctrl key
Substitute Alt key
58
to local client computer operation. This is equivalent to clicking
the Exit icon on the Control Panel. The default keys are F2, F3,
F4.
Brings up the Video Settings dialog box. This is equivalent to
clicking the Video Settings icon on the Control Panel. The default
keys are F5, F6, F7.
Toggles the Control Panel Off and On. The default keys are F3,
F4, F5.
If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this function to
shrink the non-functioning pointer down to a barely noticeable tiny
circle, which can be ignored. Since this function is a toggle, use
the hotkeys again to bring the mouse display back to its original
configuration. This is equivalent to selecting the Single pointer
type from the Mouse Pointer icon on the Control Panel. The
default keys are F7, F8, F9.
Note: The Java Control Panel does not have this feature.
This synchronizes the local and remote mouse movements. The
default keys are F7, F8, F9.
This combination performs an auto-sync operation. It is
equivalent to clicking the Video Autosync icon on the Control
Panel. The default keys are F8, F7, F6.
Toggles the display of your local mouse pointer off and on. This is
equivalent to selecting the Null pointer type from the Mouse
Pointer icon on the Control Panel. The default keys are F4,F5.
If your local client computer captures Ctrl key combinations,
preventing them from being sent to the remote server, you can
implement their effects on the remote server by specifying a
function key to substitute for the Ctrl key. If you substitute the F11
key, for example, pressing [F11 + 5] would appear to the remote
server as [Ctrl + 5]. The default key is F11.
Although all other keyboard input is captured and sent to the
KN1108v / KN1116v, [Alt + Tab] and [Ctrl + Alt + Del] work on your
local client computer. In order to implement their effects on the
remote server, another key may be substituted for the Alt key. If
you substitute the F12 key, for example, you would use [F12 +
Tab] and [Ctrl + F12 + Del]. The default key is F12.
Explanation