Filter - ATEN KN1108V User Manual

Filter

IP and MAC Filtering
IP and MAC Filters control access to the KN1108v / KN1116v switch
based on the IP and/or MAC addresses of the client computers attempting
to connect. A maximum of 100 IP filters and 100 MAC filters are allowed.
If any filters have been configured, they appear in the IP Filter and/or
MAC Filter list boxes.
To enable IP and/or MAC filtering, Click to put a check mark in the IP
Filter Enable and/or MAC Filter Enable checkbox.
If the include button is checked, all the addresses within the filter range
are allowed access; all other addresses are denied access.
If the exclude button is checked, all the addresses within the filter
range are denied access; all other addresses are allowed access.
Chapter 8. Device Management
163