KVM Over the NET™ User Manual
Additional Video Resolution Procedures
If you are running Windows, and wish to use the refresh rates indicated with
an asterisk (*) on page 7, do the following:
1. Open Control Panel
2. In the dialog box that comes up, make sure that the Hide modes that this
monitor cannot display checkbox is unchecked.
3. Click the arrow at the right of the Screen refresh rate listbox, and select
the refresh rate you want from the list that appears.
Note: Make sure that your monitor supports the refresh rate you choose – if
not, you may seriously damage your monitor.
258
→
→
Display
Settings
→
→
Advanced
Monitor.