Ip Address Determination; The Local Console; Ip Installer - ATEN KN1108V User Manual

KVM Over the NET™ User Manual

IP Address Determination

If you are an administrator logging in for the first time, you need to access the
KVM Over the NET™ switch in order to give it an IP address that users can
connect to. There are three methods to choose from. In each case, your client
computer must be on the same network segment as the KVM Over the NET™
switch. After you have connected and logged in you can give the KVM Over
the NET™ switch its fixed network address. (See Network, page 148.)

The Local Console

The easiest way to assign an IP address is from the local console. Refer to First
Time Setup, page 29, for details on the procedure involved.

IP Installer

For client computers running Windows, an IP address can be assigned with the
IP Installer utility. The utility can be obtained from the Download area of our
website. Look under Driver/SW, and the model of your switch. After
downloading the utility to your client computer, do the following:
1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
244