Super Administrator Setup; Overview; First Time Setup - ATEN KN1108V User Manual

Overview

This chapter discusses the administrative procedures that the Super
Administrator performs to get the KN1108v / KN1116v set up for the first time.

First Time Setup

Once the KN1108v / KN1116v has been cabled up, the Super Administrator
needs to set the unit up for user operation. This involves setting the network
parameters, and changing the default Super Administrator login. The most
convenient way to do this for the first time is from the local console, though it
can also be done remotely.
Note: For remote methods of setting up the network, see IP Address
Determination, page 244.
After the local console has been connected (see Single Stage Installation,
page 19), and the KN1108v / KN1116v turned on, a login prompt appears on
the console monitor:
Since this is the first time you are logging in, use the default Username:
administrator; and the default Password: password.
Note: For security purposes, you should change these to a unique Username
and Password. (See Changing the Super Administrator Login, page 32
for details.)

Super Administrator Setup

Chapter 3
29