Tv Operation - Panasonic OmniVision PV-DF2035-K Operating Instructions Manual

TV Operation

RAPID
TUNE
MUTE
INPUT
ACTION
SELECT
▲▼◄►/
SET
CH▲▼
AV Input Terminal 2
Selecting Input Mode
Method 1:
Press CH ▲▼. The display will change as follows.
Notes:
• The diagram at right is an example.
• TV CH 2 and CABLE CH 1 represent the
lowest channels in memory, while TV CH
69 and CABLE CH 125 represent the
highest channels in memory.
16
Method 2:
Press INPUT. The display will change as follows.
NUMBER
keys
Method 3:
100 key 1
2
VOL+/-
3
4
LINE 1:
Signal of source connected to AV Input terminal 1 is displayed.
(Rear of the unit.)
LINE 2:
Signal of source connected to AV Input terminal 2 is displayed.
TUNER:
Signal of source connected to VHF/UHF terminal is displayed.
Using the CH/VOL Button
LINE2
(TV)
CH2
(CABLE)
Select desired channel:
CH1
Press CH ▲▼ or NUMBER keys.
Adjust desired volume level:
(TV)
Press VOL + or VOL -.
CH69
(CABLE)
LINE1
CH125
Using the Number and 100 keys
When selecting CABLE channels 100 to 125 with the NUMBER
keys, first press the 100 key, and then enter the remaining two
digits.
Example 1:
To select channel 125, first press the 100 key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, then 2.
Example 3:
To select channel 2, first press the 0 key, then 2.
LINE1
Press ACTION for MAIN MENU.
Press ▲▼◄► to select "TV", then press SET for
SET UP TV screen.
Press ▲▼ to select "INPUT SELECT," and then
press SET to select "TUNER", "LINE 1", or "LINE 2."
Press ACTION twice to exit this mode.
LINE2 TUNER
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION