Transmitting Metadata - Sharp MX-M503N Operation Manual

TRANSMITTING METADATA

Follow the steps below to select a metadata set, enter each item, and perform metadata transmission.
Scan Internet Fax
Address Book
Address Entry
Send Settings
Address Review
File
1
Quick File
Preview
• If no metadata sets have been stored, the [Data Entry] tab cannot be selected. Store a metadata set in the Web
pages and then perform the transmission procedure.
• If a specific metadata set has been specified as the default set, go to step 3.
Metadata Set
Set Name:Metadata 1
Metadata 1
2
Metadata 3
Metadata 5
Metadata 7
Metadata 9
Data Entry
Set Name:Metadata 1
User ID
From Name
Reply To
DocumentPassword
3
AccessPassword
BillCode1
If you accidentally selected the wrong metadata set or wish to use a different metadata set when a default metadata
set has been set, touch the [Metadata Set] key. Touch the [OK] key in the message screen that appears. You will
return to the screen of step 1. Metadata items entered to that point will be cancelled.
Downloaded From ManualsPrinter.com Manuals
(1)
Fax Data Entry
A4
Original Scan: Auto Send:
Exposure Auto
Resolution 200X200dpi
File Format PDF
Colour Mode
Mono2
Special Modes
(1)
Cancel
Metadata 2
Metadata 4
Metadata 6
Metadata 8
Metadata 10
Metadata Set Cancel
Switch to data entry mode and display
the metadata set screen.
(1) Touch the [Data Entry] tab.
Auto
(2) Touch the [Metadata Entry] key.
Metadata Entry
(2)
Select a metadata set.
(2)
(1) Touch the key of the metadata set that you
OK
wish to use.
(2) Touch the [OK] key.
The keys of the items stored in the
OK
metadata set will appear. Touch the key
of the item that you want to enter.
1
2
5-126
SCANNER/INTERNET FAX
Contents