Sharp MX-M503N Operation Manual page 771

Saddle stitch unit
Before starting this procedure, remove all output from the output tray of the saddle stitch finisher. Do not replace
removed output in the output tray.
1
2
3
4
5
Take care that a bent staple does not hurt you.
Downloaded From ManualsPrinter.com Manuals
(A)
(B)
Open the side cover.
Remove the staple cartridge from the
staple unit.
Lock the staple unit.
Push the staple unit up until you hear a click.
Press (A) down and pull up knob (B).
Remove the jammed staples.
8-13
TROUBLESHOOTING
Contents