Sharp MX-M503N Operation Manual page 453

5 10 15
Condition
Settings
Address Review
Address Entry
Global
Address Search
Sub Address
Sort Address
Preview
(3), (5)
2
If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Press the [START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
3
A beep will sound to indicate that scanning is finished.
When the relay machine receives the fax, it will automatically transmit the fax to each of the end receiving machines
programmed in the memory box.
To cancel scanning...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(2)
To Cc
AAA AAA BBB BBB
CCC CCC DDD DDD
EEE EEE FFF FFF
GGG GGG HHH HHH
III III JJJ JJJ
Freq. ABCD EFGH IJKL MNOP QRSTU
Auto Reception
Fax Memory:100%
) while the original is being scanned.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the one-touch key of the desired
destination.
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
VWXYZ etc.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(3) Touch the [Sub Address] key.
"/" appears.
(4) Enter the sub-address with the numeric
keys.
(5) Touch the [Sub Address] key.
"/" appears.
(6) Enter the passcode with the numeric keys.
4-122
FACSIMILE
Contents