Sharp MX-M503N Operation Manual page 167

Changing the copy settings for each set of originals
The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals.
Perform the step below before pressing the [Start] key to scan the originals in step 4 above.
Place next original and press [Start].
to change copy settings,
press [Change].
1
Exposure
Auto
2
Copy Ratio
100%
• The original size cannot be changed manually with the [Original] key. If the automatic original detection function is
operating, the original size will be detected for each set of originals placed.
• When the bypass tray is selected, it is not possible to change the paper type.
• If "XY Zoom" was set for the ratio when the previous original was scanned, it will not be possible to change the ratio.
• When "Job Build" is used in combination with the functions below, the [Change] key will not appear in the screen of step 1
above.
Pamphlet copy, tandem copy, covers/inserts, transparency inserts, multi-shot, book copy, tab copy, staple sort, saddle
stitch
Downloaded From ManualsPrinter.com Manuals
Change Read-End
Read-End
Plain
A4
1. A4
A4R
2.
B4
3.
A3
4.
Original Paper Select
Auto
Auto
A4
A4 Preview
Plain
Touch the [Change] key.
Change the desired copy settings in the
screen that appears and press the [Start]
key.
Scanning of the originals will begin using the changed copy
settings.
To cancel the copy setting changes and begin copying without
scanning the new originals, touch the [Read-End] key.
2-55
COPIER
Contents