Operating Procedure - Ransomes Mastiff 91 Operation And Maintenance Manual

7 OPERATION

7.3 OPERATING PROCEDURE

1. Under no circumstances should the engine be started with the operator presence system engaged.
2. Do not operate the machine or attachments with loose, damaged or missing components. Whenever
possible mow when grass is dry
3. First mow in a test area to become thoroughly familiar with the operation of the machine and control
levers.
Note: To prevent damage to the reel and bottom blade never operate the reels when they are not cutting
grass. Excessive friction and heat will develop between the bottom blade and reel and damage the
cutting edge.
4. Study the area to determine the best and safest operating procedure. Consider the height of the
grass, type of terrain, and condition of the surface. Each condition will require certain adjustments or
precautions.
5. Never direct discharge of material toward bystanders, nor allow anyone near the machine while in
operation. The owner/operator is responsible for injuries inflicted to bystanders and/or damage to
their property.
6. Use discretion when mowing near gravel areas (roadway, parking areas, cart paths, etc.). Stones
discharged from the implement may cause serious injuries to bystanders and/or damage the
equipment.
7. Disengage the cylinder drive when crossing paths or roads. Look out for traffic.
GB-24
SAFETY, OPERATORS & MAINTENANCE MANUAL
To help prevent injury, always wear
safety glasses, leather work shoes or
boots, a hard hat and ear protection
Pick up all debris you can find before
mowing. Enter a new area cautiously
Always operate at speeds that allow you
to have complete control of the mower
When a trailing seat is attached always
reverse at slow speed and ensure that
the trailing seat does not jacknife