Specification; Vibration Level; Recommended Lubricants; Engine - Ransomes Mastiff 91 Operation And Maintenance Manual

4

SPECIFICATION

4.4 VIBRATION LEVEL

When the machine was tested for hand/arm
vibration levels. The operator was seated in the
normal operating position with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
The Machinery Safety Directive 98/37/EC
By compliance to:
The Lawn mower Standard EN836:1997
Referenced to hand/Arm: EN1033:1996
Information Supplied for Physical Agents Directive
2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2001)
When the machine was tested for Whole Body
vibration levels. The operator was seated in the
normal operating position with both hands on the
steering mechanism. The cutting device was
rotating with the machine driven in a straight line at
6 Km/hr on a level freshly cut lawn.
The Machinery Safety Directive 98/37/EC
By compliance to:
Whole Body EN1032:2003
Information Supplied for Physical Agents Directive
2002/44/EC
By reference to:
Whole Body Standards BS EN ISO 2631-1 (1997)

4.5 RECOMMENDED LUBRICANTS

Engine oil: Should be to MIL-L-2104B/ or to
A.P.I. Classification SC grades
and as givenin the table below:
Gearbox oil: SAE 15W-40
Landroll oil: SAE 15W-40
Grease: Shell Darina R2 or equivalent.
GB-10
SAFETY, OPERATORS & MAINTENANCE MANUAL
Ransomes Mastiff 91
Series FN & FP
Hand / Arm Acceleration
Ransomes Mastiff 91
Series FN & FP
Whole Body Acceleration
Ransomes Mastiff 91
Series FN & FP
Whole Body Acceleration
TEMPERATURE
Above 25°C (77°F)
0°C to 25°C (32°F to 77°F)
Below 0°C (32°F)
Max. LH or RH
Accelerations m/s²
Mean Value of X, Y, Y Aeq
Level
Accelerations m/s²
Mean Value of X, Y, Y Aeq
Level
Max. LH or RH Foot
Accelerations m/s²
Mean Value of X, Y, Y Aeq
Level
VISCOSITY
SAE10W-30 or SAE10W-40
SAE10W-30 or SAE10W-40
SAE10W or
SAE10W-30 or SAE10W-40
5.22
Max. Seat
1.54
2.68
SAE30 or
SAE20 or