3HK
1-3-1 Original misfeed detection
(1) Original misfeed indication
When an original jams, the machine immediately stops operation and a message is shown on the copier operation panel.
To remove the jammed original, open the DP or the DP original cover. Also if the main switch on the copier is turned on with
an original set on the original table, the original jam display appears.
To reset the original misfeed detection, open and close the DP or DP original reversing cover to turn DP original detection
switch off and on.
DPTSW
DPODSW
Figure 1-3-1 Original misfeed detection
1-3-1