Detaching And Refitting The Dp Forwarding Pulley And Dp Feed Pulley - Kyocera Mita DP-100 Service Manual

(2) Detaching and refitting the DP forwarding pulley and DP feed pulley

Follow the procedure below to clean or replace the DP forwarding or DP feed pulley.
Procedure
1. Open the DP original cover.
2. Remove the stopper ring.
3. Remove the bush and then the DP forwarding
pulley unit.
Stopper ring
Bush
DP forwarding pulley unit
Figure 1-4-2
3HK
DP original cover
1-4-3