Conveying Gear - Kyocera Mita DP-100 Service Manual

3HK
4. Remove the conveying belt.
• Detaching the DP conveying roller
5. Remove the conveying V pulley and then
remove the bush.
6. Remove the stopper ring and then remove
the conveying gear 33 and bush.
7. Remove the DP conveying roller from the
paper feed housing.
• Detaching the DP eject roller
8. Remove the eject V pulley and then remove
the bush.
9. Remove the stopper ring and then remove
the bush.
10. Remove the DP eject roller from the paper
feed housing.
11. Clean or replace the DP conveying roller and
DP eject roller.
12. Refit all the removed parts.
Eject V
pulley
1-4-6
Bush
Bush
Conveying
belt
Conveying V
pulley
DP eject roller
Paper feed
housing
DP conveying roller
Figure 1-4-6
Stopper ring
Bush
Stopper ring
Bush

Conveying gear 33