Ntegra
1
Introduction
1.1
Ntegra Variants
This user guide explains the usage and features of all current Ntegra
configurations. Therefore not all of the features are available on all models. The
following annotations will be used for features which are only available on specific
models.
• Feature
• Feature
The Ntegra is also available with both the Integral Printer and Connectivity
packages.
Other hardware and firmware options are also available.
Hardware Options
7 Digit Remote Display
1000 Note Hopper document guides Additional currency
1.2
Obligations of the User
• Everyone working with the Ntegra must read this manual.
• Observe the Safety instructions and warning labels.
• Damaged safety devices such as fuses and warning labels should be replaced
immediately by Talaris or its representative.
1.3
Safety Instructions
1.3.1
Operational Precautions
Installation Precautions
Avoid getting the Ntegra wet
Do not place vases, cups or bottles filled with water or liquid on or near the
Ntegra.
Spilt water or liquids on the Ntegra, may damage the product and may cause
fire or electrical shocks.
Ensure your hands are not wet when handling the Ntegra.
Ensure the Ntegra is only installed where there is proper ventilation and
humidity.
TP05413021 Interim
1
. . . . . . . . . Machines with Integral Printer package
2
. . . . . . . . . Machines with Connectivity package
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Firmware options
Serial Number Scanning
Clearance program
Ticket In/Ticket Out ( TITO ) program
Introduction
Page 1 of 56