Talaris ntegra 177-0800 User Manual page 18

Machine Overview
surface of the magnetic head, clean with a damp lint-free cloth, followed by a dry
lint-free cloth to finish.
Clean the display and control panel with a slightly damp lint-free cloth. You may
use a small amount of liquid soap on the cloth. Ensure all soap residue is
removed from the rollers.
Lower Section
Lift the Lower section latches to open the Ntegra Lower Section for clearing note
jams, or for cleaning.
Rollers UV Sensor
Feed
Hopper
Rollers
Sensor
Clean the rubber rollers with a slightly damp cloth. You may use a small amount
of liquid soap on the cloth. Ensure all soap residue is removed from the rollers.
Allow to dry thoroughly before connecting the machine to the mains electrical
supply.
Clean the glass of the IR Sensor with a soft brush, then clean both the IR Sensor
and the UV Sensor with a damp lint-free cloth, followed by a dry lint-free cloth to
finish.
Clean the CIS Sensor with a slightly damp lint-free cloth. You may use a small
amount of liquid soap on the cloth. Ensure all soap residue is removed from the
rollers.
Page 10 of 56
CIS Sensor
Ntegra Lower Section
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
IR Sensor
Ntegra
Exit
Sensor
Rollers
Stacker
Sensor
TP05413021 Interim