Note Orientation - Talaris ntegra 177-0800 User Manual

Ntegra
Pressing 1 on the numeric keys will bring up the following display, with the pointer
position on the 'YES' button:
If an Integral or external printer is fitted and enabled, pressing 1 on the numeric
keys will also transmit the Grand Total to the printer.
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
4.5

Note Orientation

Using the "UP" navigation key, set the Ntegra in the "Orient" mode.
Select the denomination to be counted.
through the denomination values specific to the selected currency.
When the denomination DD is displayed, the Ntegra will read the value of the first
note, and expect all other notes to be of the same value. Anything different,
including suspect notes will go to the reject pocket.
If required, press the BATCH key to enable the batch limit in quantity of notes. If
it is required to batch by value, press the BATCH key again. If a batch quantity, or
batch value, other than the default batch limit is required, enter the batch limit
using the numeric keys, followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
When the DD is displayed, the Ntegra will check the 'orientation' of the first note,
and place all other notes of the same orientation in the stacker. Anything
different, including notes of a different denomination ( both orientations )of the
selected currency, and any foreign notes will go to the reject pocket.
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Note:
Press the DOWN navigation key to step
Process Instructions
Page 31 of 56