Talaris ntegra 177-0800 User Manual page 56

Ntegra Options Ntegra
Before removing the counted notes from the stacker, press the PRINT key to
transfer the count value to the Grand Total, and if an Integral or external printer is
fitted and enabled, transmit the last count value and note serial numbers to the
printer.
Place the next notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
Press the PRINT key to transfer the count value to the Grand Total. The Grand
Total and the note serial number will transmit to the printer
Clearing The Grand Total
To clear the Grand Total ( with the stacker empty ), or If the notes have been
incorrectly removed from the stacker, pressing the PRINT key will bring up the
following display:
Page 48 of 56 TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)