Talaris ntegra 177-0800 User Manual page 33

Ntegra
The Ntegra will count the notes, and display the total value.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
To confirm the count, press the RIGHT navigation key to display the "Counting
Result". This table shows the denomination value, the number of each
denomination counted, the value of the denomination and the totals in the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Process Instructions
Page 25 of 56