Face With Add Function - Talaris ntegra 177-0800 User Manual

Ntegra
To confirm the count, press the RIGHT navigation key to display the "Counting
Result". This table shows the denomination value, the number of each
denomination counted, the value of the denomination and the totals in the count.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. Press the RIGHT navigation key to see the reason the
notes were rejected.
4.4.1

Face with ADD Function

Select the ADD function.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
The Ntegra will count the notes, and display the total.
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Process Instructions
Page 29 of 56