Currency; Denomination - Talaris ntegra 177-0800 User Manual

Ntegra
3.3.2

Currency

Press the LEFT navigation key to step through the currencies registered in the
Ntegra firmware.
There may be more currencies registered in the firmware than active
counting currencies loaded in the Ntegra.
Alternately, press the CENTRE key to display a list of all registered currencies.
Use the UP or DOWN navigation keys to move the arrow to the required currency.
Press the CENTRE key to select the currency.
Any different currency, including counterfeit suspect notes of the selected
currency will go to the reject pocket.
3.3.3

Denomination

When the 'Single' counting mode is selected, press the DOWN key to step
through the denomination values specific to the selected currency.
When the denomination DD is displayed, the Ntegra will read the value of the first
note, and expect all other notes to be of the same value. Anything different,
including suspect notes will go to the reject pocket.
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Operating / Set-up Instructions
Note:
Page 13 of 56