Printer - Talaris ntegra 177-0800 User Manual

Functions
Although not shown, the cursor starts at the first digit of the year. Either enter the
required year, using the numeric keys, or use the RIGHT navigation key to step to
the date or time that is to be set. Enter the required date / time using the numeric
keys.
Use the LEFT navigation key to go backwards if required.
When all date / time data is correct, press the ENTER key to save the date & time.
1
5.1.2

Printer

This feature is used to switch on/off the printer if fitted ( both Integral and external
printers ).
To enter the Printer feature, press the 2 key on the numeric keys.
A sub-menu will be displayed.
Press the 1 key on the numeric keys to toggle the Integral printer between manual
printing ( PRINT key press required to initiate printing ), and automatic printing.
Press the 2 key on the numeric keys to toggle the Integral printer ON or OFF.
Press the 3 key on the numeric keys to toggle the external printer ON or OFF.
Un-available options will be shown in grey text.
When the external printer is set ON ( enabled ), options 4, 5, 6 and 7 may be used
( press the appropriate key to step between available settings ) to set the
communication parameters to suit the external printer being used.
The external printer must be enabled to permit count data to be
transmitted to a computer based 'Cash Settlement System' via the RS232
serial port.
Option 8 ( Default ) will force the external printer communication parameters to
9600 baud / 8 data bits / 1 stop bit / no parity.
Page 40 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Note:
Note:
Ntegra
TP05413021 Interim