Talaris ntegra 177-0800 User Manual page 36

Process Instructions Ntegra
When the denomination DD is displayed, the Ntegra will read the value of the first
note, and expect all other notes to be of the same value. Anything different,
including suspect notes will go to the reject pocket.
If required, press the BATCH key to enable the batch limit in quantity of notes. If
it is required to batch by value, press the BATCH key again. If a batch quantity, or
batch value, other than the default batch limit is required, enter the batch limit
using the numeric keys, followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
When the DD is displayed, the Ntegra will check the 'face' of the first note, and
place all other notes of the same face in the stacker. Anything different, including
notes of a different denomination ( both faces ) of the selected currency, and any
foreign notes will go to the reject pocket.
The Ntegra will count the notes, and display the total value.
If the batch ( or reject pocket ) limit is reached, the Ntegra will stop. remove the
notes from the full pocket. If AUTO was selected, the Ntegra will re-start
automatically. If MANUAL was selected, press the START/STOP key to re-
commence the count.
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
Page 28 of 56 TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)