Yamaha Vmax VMX17C 2009 Service Manual page 36

TIP
• The transmission must be in neutral to change
settings in this mode.
• Shifting the transmission into gear saves all
settings made, then cancels the Select mode
and displays the Normal mode in all screens.
• Depending on the screen, pushing "RESET"
saves settings or cancels the Select mode to
display the Normal mode.
Push and hold "SELECT" and "RESET" for at
least two seconds to enter the Select mode.
The following items can be set/adjusted in this
mode:
• brightness
• shift timing indicator light
• clock
• stopwatch
• countdown clock
• system status
• maintenance counters
TIP
To return to the Normal mode, push "SELECT"
to scroll to " ", then push "RESET".
Adjusting the brightness
This function allows you to adjust the brightness
of the tachometer unit panel ("Meter panel"), the
tachometer needle ("Needle"), and the speed-
ometer and multi-function displays ("Display") to
suit the outside lighting conditions.
1. Push "SELECT" to highlight "Brightness".
2. Push "RESET", then push "SELECT" to scroll
through the functions and to highlight an item.
3. Push "RESET"; the brightness level seg-
ments for the selected item starts flashing.
4. Push "SELECT" to highlight the desired
brightness level.
5. Push "RESET" to set the brightness level.
6. Push "SELECT" to scroll to "
"RESET" to return to the previous menu.
Selecting the shift timing indicator light settings
1. Shift timing indicator light
This function allows you to choose whether or
not the shift timing indicator light is activated and
whether it flashes or stays on when activated.
1. Push "SELECT" to highlight "Shift light".
1-27
FEATURES
", then push
1