EAS21750
ELECTRICAL SYSTEM
EAS21760
CHECKING AND CHARGING THE BATTERY
Refer to "ELECTRICAL COMPONENTS" on
page 8-117.
EAS21770
CHECKING THE FUSES
Refer to "ELECTRICAL COMPONENTS" on
page 8-117.
EAS21780
REPLACING THE HEADLIGHT BULB
1. Remove:
• Headlight lens unit "1"
2. Disconnect:
• Headlight coupler "1"
3. Remove:
• Headlight bulb cover "2"
4. Detach:
• Headlight bulb holder "1"
5. Remove:
• Headlight bulb "2"
1
1
2
1
2
3-34
ELECTRICAL SYSTEM
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
6. Install:
• Headlight bulb
New
Secure the new headlight bulb with the head-
light bulb holder.
ECA2S31075
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil; otherwise,
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Attach:
• Headlight bulb holder
8. Install:
• Headlight bulb cover
9. Connect:
• Headlight coupler
10.Install:
• Headlight lens unit
EAS21800
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• Headlight beam (vertically)
M
MMM
M MMM
M
M MMM
M
M MMM
M
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
L
LLL
L LLL
L
L LLL
L
L LLL
L
2. Adjust:
• Headlight beam (horizontally)
M MMM
M
M MMM
M
MMM
b b
a a
1
L LLL
L
L LLL
L
LLL