1. Fuel pump coupler
2. Rear left turn signal light coupler
3. Tail/brake light coupler
4. Rear right turn signal light coupler
5. Tail/brake light lead
6. Rear right turn signal light lead
7. License plate light lead
8. Rear left turn signal light lead
9. License plate light coupler (yellow)
10. Rectifier/regulator
11. Canister purge hose (for California only)
A. Route the tail/brake light lead and rear right turn
signal light lead through the hole in the mud guard
rubber cover.
B. Route the license plate light lead and rear left turn
signal light lead through the hole in the mud guard
rubber cover.
C. Make sure that the plastic locking tie does not
protrude out of its protective tube.
2-62
CABLE ROUTING