Application Diagram - TRENDnet TPL-410AP User Manual

TRENDnet User's Guide
LED Color Sequence
Green Solid
PWR
(Power)
N/A Off
Solid
Green
Blinking
PL
Solid
(Powerline)
Amber
Blinking
Solid
Red
Blinking
N/A Off
Solid
ETH
Green
(Ethernet
Blinking
Connection)
N/A Off
Note: Powerline (PL) LED color indicates the strength and quality of the Powerline
connection through the electrical system.
Note: The following factors may affect the Powerline network's connection quality:
• Noise – Generated by appliances which use your electrical system (e.g.
Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your
household electrical wiring may also cause additional noise on your electrical
system.
• Distance – Long lengths of electrical wiring through your electrical system
between connected Powerline adapters.
© Copyright 2014 TRENDnet. All Rights Reserved.
Definition
Device powered on
Device powered off
Powerline connected (Connection quality is
Best)
Syncing or Powerline data
transmitting/receiving (Connection quality is
Best)
Powerline connected (Connection quality is
Better)
Powerline data transmitting/receiving
(Connection quality is Better)
Powerline connected (Connection quality is
Good)
Powerline data transmitting/receiving
(Connection quality is Good)
Powerline is not synced or connected
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) connected
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) data transmitting/receiving
Port disconnected/no Ethernet link
Power Saving (TPL-406E): The device will automatically reduce power usage when the
connected device via Ethernet is powered off, unplugged or inactive for more than 5
minutes. The device will return to active mode when the connected device via Ethernet
is powered on and the link is active.
Note (TPL-406E): This device offers EU compliant Standby mode functionality. To turn
off the device, unplug it from the power outlet.
Note (TPL-410AP): This device offers EU compliant Off mode functionality. To turn off
the device, push the power switch into the off position.

Application Diagram

TPL-410AP / TPL-410APK
The first Powerline unit is
networked to a router which
is in turn connected to a
modem (typically from your
Internet Service Provider
(ISP)) which provides Internet
connectivity (ex. TPL-406E).
The Powerline Access Point
is plugged into a wall power
outlet near a media center
and can allow a network
game console and another
network enabled media
device such as a network
enabled media player to
connect to the Ethernet ports
and provide Internet
connectivity and WiFi
connectivity.
5