Preparation To Send Data Via A Scan Server (For The Administrator); Preparation Flow; Operations Required To Use This Function; Checking A Lan Cable For Connection - Muratec MFX-C2280 User Manual

9.2

Preparation to Send Data via a Scan Server (for the Administrator)

9.2 Preparation to Send Data via a Scan Server (for the Administrator)
9.2.1

Preparation Flow

1
Connecting this machine to the network

% Checking a LAN cable for connection

% Checking the network settings

Check that an IP address is assigned to this machine.
2
Prepare the environment required to send data via a scan server
% Enabling the Distributed Scan function
3
Preparation finished
9.2.2

Operations Required to Use This Function

Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d
Reference
If no IP address is displayed, you need to set up the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".

Configuring the environment to send data via a scan server.

Enable the Distributed Scan function.
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Associating with External Application]".
Distributing Data via a Scan Server
9
9-3