When Using Mac Os X 10.7/10.6/10.5 - Muratec MFX-C2280 User Manual

3.2 Preparation for SMB Send
12
Click [OK], and close the screen.
The settings on the computer are then completed. The computer, user, and folder names you wrote
down in this procedure are required to specify a destination.

When using Mac OS X 10.7/10.6/10.5:

Carry out preparations to send original data scanned by this machine to your computer.
First, create a shared folder that is only to be used to receive scanned original data. Then, check the IP ad-
dress and user name, and start sharing.
The following shows a procedure example for Mac OS X 10.6.
0 You need to have the administrator privileges to perform this task.
1
Create a new folder in any place, and name it.
% The folder name is required to specify a destination. Write down the folder name.
2
Select [About This Mac] in the Apple menu.
The [About This Mac] screen appears.
3
Click [More Info...].
% In Mac OS X 10.7, click [More Info...] then click [System Report...].
4
Check the IP address and the name of the user who logs in to the computer.
% The IP address and user name are required to configure folder sharing settings and specify desti-
nations. Write them both down.
Then, close the window.
Sending a File to a Shared Folder of a Computer (SMB Send)
3
3-13