Preparation For Twain Scanning; Machine Side: Steps Required To Use This Function (For The Administrator); Checking A Lan Cable For Connection; Checking The Network Settings - Muratec MFX-C2280 User Manual

8.2

Preparation for TWAIN Scanning

8.2 Preparation for TWAIN Scanning
8.2.1

Machine Side: Steps Required to Use This Function (for the Administrator)

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.

Checking the network settings

Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d
Reference
If no IP address is displayed, you need to set up the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".

Checking the environment to use the TWAIN scan function

Check that the appropriate settings are configured to use this machine as a scanner. (You can use this func-
tion with the default settings unless otherwise requested.)
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Configuring the Scan Environment]".
Importing Images by TWAIN Scan
8
8-3