5.2
Preparation for WebDAV Send (for the Administrator)
5.2
Preparation for WebDAV Send (for the Administrator)
5.2.1
Preparation Flow
1
Connecting this machine to the network
% Checking a LAN cable for connection
% Checking the network settings
Check that an IP address is assigned to this machine.
2
Prepare the environment required to use the WebDAV Send function
% Enabling the WebDAV Send function
You can use this function with the default settings unless otherwise requested.
3
Configuring the machine to your environment
% Registering a frequently used destination
This will save you the trouble of entering a destination each time you send data.
% Using a proxy server
When transferring data via a proxy server in your network environment, configure its setting.
% Using SSL communication
If a communication with the WebDAV server is encrypted using SSL in your environment, configure its
setting.
4
Preparation finished
5.2.2
Operations Required to Use This Function
Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an
IP address is displayed.
d
Reference
If no IP address is displayed, you need to configure the network. For details, refer to "User's Guide [Web Man-
agement Tool]/[Operations Required to Use Web Connection]".
Checking the environment to use the WebDAV Send function
Enable the WebDAV Send function. (You can use this function with the default settings unless otherwise re-
quested.)
How to configure the setting is explained using Web Connection. For details, refer to "User's Guide [Web
Management Tool]/[Configuring the Scan Environment]".
Sending to a WebDAV Server (WebDAV Send)
5
5-3